X9C104SZT1
ActiveDIGITALLY CONTROLLED POTENTIOMETER (XDCP™)
Deep-Dive with AI
Search across all available documentation for this part.
X9C104SZT1
ActiveDIGITALLY CONTROLLED POTENTIOMETER (XDCP™)
Deep-Dive with AI
Technical Specifications
Parameters and characteristics commom to parts in this series
| Specification | X9C104SZT1 | X9C104 Series |
|---|---|---|
| Configuration | Potentiometer | Potentiometer |
| Interface | Up/Down | Up/Down |
| Memory Type | Non-Volatile | Non-Volatile |
| Mounting Type | Surface Mount | Through Hole, Surface Mount |
| Number of Circuits | 1 | 1 |
| Number of Taps | 100 | 100 |
| Operating Temperature [Max] | 70 °C | 70 - 85 °C |
| Operating Temperature [Min] | 0 °C | -40 - 0 °C |
| Package / Case | 8-SOIC | 8-DIP, 8-SOIC |
| Package / Case | - | 0.3 in |
| Package / Case | - | 7.62 mm |
| Package / Case [x] | 0.154 in | 0.154 in |
| Package / Case [y] | 3.9 mm | 3.9 mm |
| Resistance - Wiper (Ohms) (Typ) | 40 Ohms | 40 Ohms |
| Resistance (Ohms) | 100 kOhms | 100 kOhms |
| Supplier Device Package | 8-SOIC | 8-PDIP, 8-SOIC |
| Taper | Linear | Linear |
| Temperature Coefficient (Typ) | 300 ppm/°C | 300 ppm/°C |
| Tolerance | 20 % | 20 % |
X9C104 Series
IC DGTL POT 100KOHM 100TAP 8DIP
| Part | Resistance - Wiper (Ohms) (Typ) | Supplier Device Package | Interface | Number of Circuits | Resistance (Ohms) | Tolerance | Memory Type | Temperature Coefficient (Typ) | Mounting Type | Number of Taps | Package / Case | Package / Case | Package / Case | Configuration | Taper | Operating Temperature [Max] | Operating Temperature [Min] | Package / Case [y] | Package / Case [x] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Renesas Electronics Corporation X9C104PI | 40 Ohms | 8-PDIP | Up/Down | 1 | 100 kOhms | 20 % | Non-Volatile | 300 ppm/°C | Through Hole | 100 | 0.3 in | 8-DIP | 7.62 mm | Potentiometer | Linear | 85 °C | -40 °C | ||
Renesas Electronics Corporation X9C104P | 40 Ohms | 8-PDIP | Up/Down | 1 | 100 kOhms | 20 % | Non-Volatile | 300 ppm/°C | Through Hole | 100 | 0.3 in | 8-DIP | 7.62 mm | Potentiometer | Linear | 70 °C | 0 °C | ||
Renesas Electronics Corporation X9C104SZT1 | 40 Ohms | 8-SOIC | Up/Down | 1 | 100 kOhms | 20 % | Non-Volatile | 300 ppm/°C | Surface Mount | 100 | 8-SOIC | Potentiometer | Linear | 70 °C | 0 °C | 3.9 mm | 0.154 in | ||
Renesas Electronics Corporation X9C104SIT2 | 40 Ohms | 8-SOIC | Up/Down | 1 | 100 kOhms | 20 % | Non-Volatile | 300 ppm/°C | Surface Mount | 100 | 8-SOIC | Potentiometer | Linear | 85 °C | -40 °C | 3.9 mm | 0.154 in | ||
Renesas Electronics Corporation X9C104SI | 40 Ohms | 8-SOIC | Up/Down | 1 | 100 kOhms | 20 % | Non-Volatile | 300 ppm/°C | Surface Mount | 100 | 8-SOIC | Potentiometer | Linear | 85 °C | -40 °C | 3.9 mm | 0.154 in | ||
Renesas Electronics Corporation X9C104ST2 | 40 Ohms | 8-SOIC | Up/Down | 1 | 100 kOhms | 20 % | Non-Volatile | 300 ppm/°C | Surface Mount | 100 | 8-SOIC | Potentiometer | Linear | 70 °C | 0 °C | 3.9 mm | 0.154 in | ||
Renesas Electronics Corporation X9C104SZ | 40 Ohms | 8-SOIC | Up/Down | 1 | 100 kOhms | 20 % | Non-Volatile | 300 ppm/°C | Surface Mount | 100 | 8-SOIC | Potentiometer | Linear | 70 °C | 0 °C | 3.9 mm | 0.154 in | ||
Renesas Electronics Corporation X9C104SIT1 | 40 Ohms | 8-SOIC | Up/Down | 1 | 100 kOhms | 20 % | Non-Volatile | 300 ppm/°C | Surface Mount | 100 | 8-SOIC | Potentiometer | Linear | 85 °C | -40 °C | 3.9 mm | 0.154 in |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 2500 | $ 3.87 | |
Description
General part information
X9C104 Series
The X9C102, X9C103, X9C104, X9C503 are Intersil's digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications ranging from control to signal processing to parameter adjustment.
Documents
Technical documentation and resources